Your Cart

Your cart is empty.
Optoma UHZ65LV

Optoma UHZ65LV Native 4K UHD 5000 Lumen Home Cinema Laser Projector (Optoma-UHZ65LV)

4.50 stars, based on 2 reviews
Bright 4K UHD Laser Projector UHZ65LV Incredible native 4K UHD (3840 × 2160) resolution with HDR10 and HLG compatibility PureEngine (MEMC) & UltraDetail for outstanding video performance Bright 5,000 lumens for lights-on viewing Vertical lens shift...

Could use some features.

Rating:
review-star review-star review-star review-star review-star
Pros:
Cons:
  • Verified Purchase

First, the most important part -- the brightness, contrast, and picture quality of this projector are absolutely stunning. I would certainly buy it again over anything else I've seen.

But... there are a few issues which are unrelated to picture quality. It doesn't have wi-fi, and only has an IR remote. I have the unit mounted in a projection room, and needing line-of-sight to either the front or the rear of the unit is a major hassle. If it had wi-fi, I could probably use a home-automation app to control it. It does have a feature which automatically turns the unit on when power is applied. This allowed me to use a wifi-operated receptacle which I can control from my phone. The downside of this is when I turn off the receptacle it doesn't allow for any cool-down period for the projector's fan to remain on.

Then there's the issue of placement. This unit has very little latitude in where you can put it in relation to the screen. As far as left-right placement, it must be dead-center. The unit must also be completely level. There is NO key-stoning adjustment at all. If you are thinking you can just mount it on the ceiling, tilt it down toward the screen, and adjust out the key-stoning, forget it. It can be mounted right-side up or upside down, and there is a small amount of up-down adjustment available, but not much. I got lucky and my projection window happened to be just right for hanging the unit upside down from the top.

This projector has only manual focus and zoom controls. I didn't initially see this as a problem, since I planned to set these once and forget them. This is correct for focus, but zoom is another story. When switching between Blu-Ray and Netflix, for example, the width of the picture varies widely, and I'm constantly having to go into the projection room and change the zoom.

The picture itself is so astounding that I tend to forget these issues once the movie starts, but I thought I'd list them here, in case they might be a deal-breaker for someone else.


Extremely bright for ambiant day light viewing, excellent for HDR (from deep blacks with Dynamic Black to 5,000 lumen bright whites), with a few bugs they should fix

Rating:
review-star review-star review-star review-star review-star
Pros:
Cons:
  • Verified Purchase

Pros:



- Extremely bright (Optoma claims 5,000 lumen): makes it possible to watch TV with ambiant day light and impressive HDR performance on a 130’’ screen.



- Extremely sharp (4K 0.66" DLP chip): not “native 3840x2160”, but XPR pixel shifting gives an image as sharp as native 4K for movie watching (but not ideal as a giant 3840x2160 computer screen if you need pixel perfectness)



- Contrast (Optoma claims native 2,000:1 full on/off): I didn’t measure it but it looks accurate, it’s definitely better than an LCD screen. But the contrast can go all the way to 300,000:1 (from Optoma's specs) with Dynamic Black which dims the laser to allow just enough light necessary to show the current frame, making black more black.



- Colors: does not suffer from color brightness crushing, even with BrillantColors set to the max. I measured 97% sRGB, 78% of P3 with a SpyderX.



- HDR: with the right setting you can go from very dark dark scenes with deep blacks and no glowing border to blindingly bright scenes with intense, yet accurate colors.



- 3D: Unlike the UHZ65, the UHZ65LV does support 3D Blu-Ray with DLP Link glasses.



- Turns on at max brightness in a few seconds, no bulb to replace.



- The remote control has a laser pointer… just in case you have a cat.



Cons: (I’m on System Firmware version C04, I hope these are going to be fixed in a future version)



- Has terrible banding issues with HDR in 12bit 4:2:2. Problem solved if the signal 10bit 4:4:4, or 10bit 4:2:0. Workaround for AppleTV: stay in 60fps 10bit 4:2:0, enable “Match Dynamic Range" but do not enable "Match Frame Rate".



- All Dynamic Black modes fail to calculate the light it needs right to preserve accurate colors, typically on small bright objects in mostly dark scenes, it tends to over-dim and crush whites and colors when becoming a solid blob of saturated dim color. Most color enhancement settings make this a lot worse. I ended up turning it off in SDR and finding HDR settings that mostly mitigate the problem. Too bad there is no “don’t crush bright colors” option for Dynamic Black.



- 3D is a bit flaky. Has to be turned of manually every-time, sometimes it fails the first time (stuck in black screen, screen getting split or duplicated, weird flickering messing up with the motion perception part of my brain), but after a few attempts it ends up working and it looks good. Just keep trying.



My settings:



SDR: Modified Cinema mode, Sharpness: 7, Gamma 2.2, Brilliant Color: 1, Color Gamut: Presentation, Dynamic Black OFF, Power: 70%, else to 0/Minimum/Disabled



HDR: Modified HDR mode, Color 10, Sharpness: 7, Gamma 2.4, Brilliant Color: 1, Color Gamut: Presentation, Dynamic Black 2, else to 0/Minimum/Disabled



Conclusion:



There is nothing else on the market in that price range that can deliver and HDR image matching both the super-dark black levels and the super-bright colors/white of this projector (other projectors are too dim or too expensive)



So, no regret, buying it but please Optoma, fix your bugs! You're so close to perfection!



Special kudos to the www.projectorscreen.com support team who still work hard during the COVID-19 crisis and helped me figure out what was happening with my shipment.


CPS Warranty Included

Purchase this product worry-free with a complimentary 2-year extended warranty from CPS with ACCIDENTAL DAMAGE protection. Want even more coverage? Upgrade to a 3 or 4 year at a discounted price.

Manufacturer’s Pricing Policy

Why do I need to contact you in order to place my order?

As an authorized dealer for the product you are looking at, ProjectorScreen.com is bound by certain agreements with our manufacturer partners in how we display, price and sell certain products.

Some items may not be able to be advertised below a certain price or any pricing at all and others may not be able to be added to a shopping cart via an “add to cart” button.

If a competitor’s website has the same product but is not restricting the display/functionality in the same way that you see here on ProjectorScreen.com, than that competitor is likely NOT an authorized dealer.

What does that mean for you as the customer? It is very likely that the manufacturer may not honor your products warranty, or that your product was never intended for the US market to begin with.

If you have any questions regarding a specific product, please do not hesitate to contact us at (888) 392-4814.